3D-Druck Ersatzteilekatalog
-
-
Ich habe auch etwas veröffentlicht.
BLoss keine Ersatzteil sondern Lagersystem für Chip und CPU, unabhängig von Größe des Chip.
Nur für CPU mit 1.27er Raster ist "Finnen" zu dick (Pentium4, Athlon64 X2, XEON (P4 )
Das ist "the universal CPU tray"
https://www.thingiverse.com/thing:6435480 -
War mal stöbern, was es neues gibt.
Doppel-Caddy für HP Z-Series 240/440/640/840
HP Z440 3.5 drive caddy for 2 ssd drives by jimshadya 3.5 drive caddy that holds 2 ssd drives in a single drive bay made this in a pinch when I added a second ssd and the power cables limited me to the 3.5 drive…www.thingiverse.comIBM PS/2 Model 56, 57, 76, 77, 95 Laufwerksschienen
IBM PS/2 Model 95 Rails by sbentingThese are a clone of the IBM Model 95 Rails. They should also work with Model 56, 57, 76, and 77 when using the appropriate Bezel (CD, MO, Tape, etc). Note…www.thingiverse.comIBM PS/2 Model P70/P75 Tastaturschloss
IBM PS/2 P70 / P75 keyboard lock repair by CoatA repair part for the IBM PS/2 portable computer for a broken latch/lever/lock of the keyboard. Before you begin, be aware that you have to remove the top of…www.thingiverse.comIBM Thinkpad 600 HDD Bezel
IBM ThinkPad 600 HDD Cover by YalusSee the IBM ThinkPad 600's hardware maintenance manual. This is a component called HDD cover.www.thingiverse.comIBM Thinkpad 770 Ultrabay-Caddy
IBM ThinkPad 770 UltraBay Dummy by YalusSee the IBM ThinkPad 770's hardware maintenance manual. This is a component called Ultrabay. No supports are needed when printed upright.www.thingiverse.comIBM Tastaturfuß
IBM KB-8923 keyboard foot by CoatA copy of the keyboard-foot of the IBM kb-8923. Maybe also suitable for other IBM-keyboards. Measurements without the pins at the side are 34 x 27.3 x 10 mm…www.thingiverse.com
Minigehäuse für ISA-Backplanerechner (z.B. Sergeys Micro 8088)Sergey Kiselev's micro_8088 cabinet by giobbinoA desktop cabinet for the awesome Sergey Kiselev's (Malinov) micro_8088 (IBM XT clone). Instructions and link to the github pages of the shown boards included…www.thingiverse.comDiverse ISA-Brackets (Adlib, XT-IDE, Micro 8088)
giobbino's Thingiverse Profilewww.thingiverse.comToshiba Satellite 3xx Trackpoint
Toshiba Satellite 325CDS Trackpoint Nub by ToasterCorporationReplacement trackpoint nub for a 1996 Toshiba Satellite 325CDS. It may work in other Satellite 3xx machines, and may also work in some IBM Thinkpads.www.thingiverse.comToshiba Satellite 1xxx Trackpoint
Toshiba Trackpoint by HughMannMade the hole slightly smaller to fit the 3mm stem of the Satellite Pro 4300. Printed in PLA because I didn't have anything else, but fits well and looks great.www.thingiverse.comToshiba Libretto 100 I/O-Bracket
MIDI I/O Lid for Toshiba Libretto 100CT by now_its_darkAdd native MIDI to the Toshiba Libretto 100CT! This is super useful, particularly if your Libretto has a working battery, since it makes for an excellent MIDI…www.thingiverse.comApple PowerMac 9600, 7300, 7500, … diverse Bezels
StephenLulz's Thingiverse Profilewww.thingiverse.comApple Disk II Connector
Apple Disk II No-Solder Connector Shroud by junkjunkerA very common problem on vintage Apple II computers with the Disk ][ Interface Card, is that the connectors are simple pins with no shroud to help guide and…www.thingiverse.com
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!