Kann man auch mit Google anmelden, wenn du ein Smartphone mit Store hast hast du eh einen Account.
3D-Druck Ersatzteilekatalog
-
-
3.5"-Floppy-Laufwerksadapter für PS/2 Model 70 (wahrsch. auch 50/60/80)
von CNC_Performance
https://www.thingiverse.com/thing:4774831
CNC-Performance-Floppy-Cradle-Photo-4-scaled.jpg
Siehe auch Variante von TubeTimeUS
-
muss man nur den richtigen Kühlkörper finden wenn man keinen hat
Cooler Adapter for 486 / Socket 3 by oerkThis is the plastic cooler adapter ring for 486 processors, for the flat type of coolers. The originals from the 90s are breaking easily, and can be replaced…www.thingiverse.comEDIT:
für 40x40x20
486 Socket 3 adapter for 40x40x20 Heatsink by douglarAttach a 40x40x20mm heatsink to a 486 CPUwww.thingiverse.com -
Gehäuse Füße aus TPU
Infill 30%
Layerhöhe 0,3mm
Rutschfest und als Bonus Öl und Säureresistent.
Dämpft die Geräusch Übertragung auf den Schreibtisch ungemein. -
Komplettes 386er/486er Clone-Gehäuse
386 / 486 Retro PC Case by wiretapOverall size of the case faceplate is roughly 275mm tall by 175mm wide. I just printed it and gave everything a rough test fit. It is by no means perfect, but…www.thingiverse.comMan müsste mal einen Remix für ein Stand-Alone-Frontpanel machen, das in jeden 5,25"-Schacht passt.
-
Cooles Teil. Ist aber nur für eine kleine Backplane + SBC gemacht.
-
Man müsste mal einen Remix für ein Stand-Alone-Frontpanel machen, das in jeden 5,25"-Schacht passt.
Oder ne ganze Frontplatte für ein heute gängiges Standardgehäuse. Dann hätte man den PC auch anständig geschirmt untergebracht.
-
pasted-from-clipboard.pngpasted-from-clipboard.png
Thermaltake Karten Ding Cover Teil was auch immer
Foto der Rückseite leider vergessen.
-
Endlich: C64-Userport-Steckergehäuse!
C64 User Port Cap Classic by hackupThis is a remake of the classic caps for user port board-edge connectors of the Commodore home computers. Each cap consist of a top and a bottom part with…www.thingiverse.comUnd nützliche Keys für die Anti-Verdrehungs-Kodierung
Edge Connector Keying Insert (C64 User Port) by hackupThese inserts can be used to key edge connectors like those required on the user port or cassette port of the Commodore 64. Properly keyed connectors will fit…www.thingiverse.com -
Ersatzhebel für 5.25“ Chinon-Floppydrive FZ-502
Chinon FZ-502 floppy drive lever by InbetweenDaysCreated as a very close replica to the original drive lever. I made the bottom part flat (ie no taper) so that it could be printed that way, but then I had…www.thingiverse.comIBM-Style 5.35“ Frontpanel für Gotek
Alternative Frontpanel for 5.25" IBM PCjr Floppy Drive case for Gotek FDD emulator by GeekDotThis is an alternative Front-Panel/Bezel for erikhuybregts wonderful "5.25" IBM PCjr Floppy Drive case for Gotek FDD emulator" design. My changes are It…www.thingiverse.comAbdeckung für leere MCA-Slots
MCA (Microchannel) slot cover for IBM PS/2 by InbetweenDaysSlot cover for MCA equipped IBM PS/2 computers. This is a modification of the bracket created by Eric Schlaepfer as part of his Snark Barker card project…www.thingiverse.comCartridge-Gehäuse für IBM PCjr
IBM PCjr Cartridge Case by JAElectronicIBM PCjr Cartridge Case Print your own case for a PCjr Cartridge PCB.www.thingiverse.comPlastiknieten-Werkzeug für IBM PS/2
IBM PS/2 Tab Remover by WizzyProtogenHere is a remake of the clip remover tool found on the IBM PS/2 model 50(z), 70, and maybe others. The tool isn't really needed to work on these machines, but…www.thingiverse.comBatteriegehäuse für IBM PS/2 Note CL57
IBM PS/2 CL57 sx Battery Blank (06G9258) by hrushcollectsI made these to replace the Ni-MH batteries in the CL57sx. The IBM part number of the batteries are: P/N: 06G9258 FRU P/N: 06G9259 Because of the base and the…www.thingiverse.com -
das sieht lustig und nützlich aus - Testbench zum 3d Drucken
Versatile PC Testbench Case by TechAmbrosiahttps://youtu.be/2-eV7zN-AMA Now includes mini versions for Kingroon KPS3 and Prusa Mini 180mm printers! Introducing the next generation of 3D-printable PC…www.thingiverse.com -
das sieht lustig und nützlich aus - Testbench zum 3d Drucken
Das hat ein
sexyberühmterYouTuber neulich mal ausprobiert:Externer Inhalt youtu.beInhalte von externen Seiten werden ohne Ihre Zustimmung nicht automatisch geladen und angezeigt.Durch die Aktivierung der externen Inhalte erklären Sie sich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt. -
Hier bekommt ihr Datei zu Socket 8 zu 478 Adapter Projekt
Leider keine Pentium4 auf Socket8 CPU Adapter, sondern: Ihr habt Verwendung für S478 Kühler gefundet, der dann auf PentiumPro gespaxt werden kann.
Ich habe in Thingverse schlanke Version geparkt. Schlanke Version ist für Asus P/I P6RP4 Brett entworfen, wo Nase von Socket8 nur 3,5-4 mm Luft zu PCI Slot hat.
Verstärkte Version hinzufügt. (meine Empfehlung, wenn ihr viel Luft um Socket Nase hat.)
PentiumPro Socket 8 cooler adapter retention frame by madao_This is an adapter for using Pentium 4 (Socket 478) coolers on Pentium Pro (Socket 8) motherboards. Important notice: This 3D printed adapter/retention frame…www.thingiverse.comKleine Bitte: Wenn ihr Fehler in meine englische Text findet, bitte ich um Korrektur (Ich habe nur 3 Jahre Schulenglisch )
EDIT: Schau mal, reingerotzte Kommentar in thingiverse. Wohl wieder Gesundheit.
-
Vorschlag:
ZitatThis is an adapter for using Pentium 4 (Socket 478) coolers on Pentium Pro (Socket motherboards.
Important notice: This 3D printed adapter/retention frame isn't really capable of carrying much force from the socket 478 cooler mounting mechanism. Modification of cooler to reduce force is required.
I recommend ABS or PETG.
-
Einfach aus einer alten Tastatur von der Space Taste die Metallklammer klauen, mit Flachzange biegen.
Oder passenden Draht im Baumarkt besorgen.
Vielfach erprobt, klappt von Sockel 3 bis 370 1A.
Nur bei 462 würde ich es mir überlegen, Anpressdruck reicht nicht.
Kühlkörper drauf und an die Haltenasen damit.
Kein 3D Druck nötig
-
Hier die Varianten für den Kartenhalter:
PCIe:AGP / PCI:
ISA 16 Bit (geht auch für kurze 8 Bit Karten)
ISA 8 Bit (für voll Länge muss der Winkel des Modell angepasst werden)
-
-
Volle Länge Winkel anpassen oder Boden aufdicken.
Ich zeig die Tage mal Fotos, was ich meine.
-
...wenn die Karte zu lang ist liegt sie halt hinten auf...
womit hattest du das erstellt Autodesk?
-
Nee, das ist nicht Inventor. Auch kein Solidworks.
Ich vermute mal Autodesk Fusion oder sowas.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!