Gotek Problem nach dem flashen

  • Hallo Zusammen,


    Ich habe ein Problem mit meinem Gotek SFR1M44-U100K.
    Der Gotek habe es mit der Firmware FlashFloppy 2.14 geflasht.
    Dabei benutzte ich das FF_Gotek-v2.14.hex und flashte es mit der Software STMFlashLoader-Demo_V2.9.0RC4.


    Hat auch wunderbar geklappt. Am den drei Siebenegmentanzeigen zeigten F-F, was ja normal sein soll.


    Nach Anschluss eines OELED Display und Rotary Encoder funktioniert laut Display alles super. Die IMG Dateien werden korrekt angezeigt.


    Auf dem Stick befinden sich IMG Dateien, die FF.CFG, IMG.CFG und die IMAGE_A.CFG.


    Doch nun das riesen Problem, ich kann nicht auf Laufwerk a: zugreifen, der Gotek übermittelt keine Dateien. Kein Zugriff auf Laufwerl a:


    Was habe ich da übersehen oder falsch gemacht? Möchtes den GOTEK nur am PC verwenden.


    Im Ursprungszustand hat der GOTEK einwandfrei funktioniert.


    Es wäre toll, sollte jemand das Problem erkennen und eine Lösung parat haben,


    Ganz herzlichen Dank im Voraus.


    Gruß Olaf

  • eigentlich ist das die Standard Variante, die problemlos am PC läuft (habe davon 10 Stück hier rumliegen/eingebaut)


    eins habe ich umgebaut zu FlashFloppy, aber damit habe ich auch Probleme und bin unzufrieden (imho bringt einem die FlashFloppy Firmware auch kaum Mehrnutzen am PC, zumal sie auch nur mit Display zu gebrauchen ist)

  • Das ist egal, der ist mit FlashFloppy Kombatibel.


    Nur die FIrmware war mal anders.


    Ich würde empfehlen die Firmware neu aufzuspielen.


    Die FlashFloppy Firmware bringt den massiven Nutzen einfach Image Dateien nutzen zu können..
    Und damit den Vorteil auch nicht FAT formatierte Medien, Booter usw zu starten.
    Oder auch andere Betriebsysteme wie MS-DOS.


    Ich sehe es eher umgekehrt, Gotek ist viel zu eingeschränkt mit Default Firmware.
    Erstell mal eine Windows NT Bootdiskette damit.


    Ist dein USB Stick evtl. falsch formatiert ? (NTFS?) Fat32 sollte es sein.


    Und natürlich müssen die Jumper wie auf dem Bild von Karl sein.

    совок

  • Erst einmal vielen Dank für die schnellen und vielen Antworten.


    gibt es einen Grund, warum du ausgerechnet den SFR1M44-U100K verwendet hast,

    welche Version war drauf vor dem Flashen

    nein, ich denke das ist der Standard Emulator, welches käme denn für mich in Frage?
    Es war die original Gotek Firmware drauf, und die hat ja funktioniert.
    Ich fande das mir dem Display eben interessant, deshalb der Nachbau.


    Ich würde empfehlen die Firmware neu aufzuspielen.

    Habe ich schon mehrmals gemacht, auch die beta version 3.3.
    Wenn ich die original Gotek Firmware hätte, würde ich es mit dieser versuchen.
    Weiß jemand, wo es die gibt.
    Ja, ich hätte dies vorher sichern sollen, geht ja mit der STMFlashLoader Software.


    Ist dein USB Stick evtl. falsch formatiert ? (NTFS?)
    Nein, ganz normal mit FAT32.
    Komisch dass ich alles korrekt auswählen kann, aber keine Datenübertragung.
    Sagt immer ich soll eine Diskett einlegen.


    Ich weiß mir wirklich nicht mehr zu helfen.
    Käme nur noch der Gotek original Firmware Flash in Frage.
    Vielleicht kann mir ja jemand von einmen ungeflashten Gotek ein Hex File sichern. Wäre super.
    Übrigens, wenn ich ein Diskettenlaufwerk anschließe, liest und schreibt er die Disketten ganz normal.
    Also Port und Kabel sind ok.

  • das ist die unveränderte 3.11


    ## FF.CFG: Example FlashFloppy Configuration File



    # Place in the root folder or FF/ subfolder of your USB drive.
    # NOTE: If FF/ exists, IMG.CFG must reside there, not the root folder.



    # Uncommented lines below are the default settings.
    # Uncommented options cannot be overridden by settings in other config files.



    ##
    ## DRIVE EMULATION



    # Floppy-drive interface mode
    # shugart: P2=DSKCHG, P34=RDY
    # ibmpc: P2=unused, P34=DSKCHG
    # ibmpc-hdout: P2=HD_OUT, P34=DSKCHG (not generally needed: prefer 'ibmpc')
    # akai-s950: P2=HD_OUT, P34=RDY (Akai S950)
    # amiga: P2=DSKCHG, P34=DRIVE_ID (not generally needed: prefer 'shugart')
    # jc: JC closed: ibmpc, JC open: shugart
    interface = jc



    # Host platform: Improves image-format detection for generic types such as IMG
    # acorn: Acorn ADFS
    # akai: Akai (S01, S20, S950), Korg, SC Prophet 3000
    # casio: Casio (FZ-1)
    # dec: DEC (RX33, RX50)
    # ensoniq: Ensoniq (ASR, TS, etc)
    # fluke: Fluke 9100
    # gem: General Music (S2, S3)
    # kaypro: Kaypro
    # memotech: Memotech
    # msx: MSX
    # nascom: Nascom
    # pc98: NEC PC-98
    # pc-dos: PC DOS Format (geometry determined from Bios Parameter Block)
    # tandy-coco: Tandy Color Computer (CoCo)
    # ti99: TI-99/4A
    # uknc: UKNC / DVK Soviet PDP-11
    # unspecified: Common default geometries (including IBM PC)
    host = unspecified



    # Pins 2 & 34 output (drive->host) manual configuration
    # auto: Auto-configure from interface= setting
    # nc: Unused/No Connection [eg. if pin is an input (host->drive) on your host]
    # low: Always 0 volts (0v)
    # high: Always 5 volts (5v)
    # rdy: Drive ready (Ready = 0v)
    # nrdy: Logical complement of above
    # dens: Density mode (High Density = 0v)
    # ndens: Logical complement of above
    # chg: Disk changed (Changed = 0v)
    # nchg: Logical complement of above
    # Values: auto, nc, low, high, rdy, nrdy, dens, ndens, chg, nchg
    pin02 = auto
    pin34 = auto



    # Forcibly write-protect images, or respect the FAT read-only attribute?
    # Values: yes | no
    write-protect = no



    # Filter glitches in the SIDE-select signal shorter than N microseconds
    # Values: 0 <= N <= 255
    side-select-glitch-filter = 0



    # Rotational offset of data after a track change
    # instant: No rotation during track change
    # realtime: Emulate rotation of disk while track is changing
    # Values: instant | realtime
    track-change = instant



    # Index pulses suppressed when RDATA and WDATA inactive?
    # Values: yes | no
    index-suppression = yes



    # Milliseconds from head-step start to RDATA active.
    # Values: 0 <= N <= 255
    head-settle-ms = 12



    # Milliseconds delay from motor-on to drive ready.
    # On a standard unmodified Gotek the motor signal is not connected and a
    # non-default value here will have no effect. Most systems and software do
    # not care about correct motor behaviour, and default (ignore) works fine.
    # Values: ignore | 0 <= N <= 1000
    motor-delay = ignore



    # What causes the disk-change (chg) signal to reset after disk insertion?
    # step: Step command received
    # pa14: CHGRST (pin 1 on old Sony drives), connected to PA14 (JTCK/SWCLK)
    # delay-N: Automatically after N*0.5sec (0 <= N <= 15)
    chgrst = step



    ##
    ## STARTUP / INITIALISATION



    # Disk image loaded or ejected at startup?
    # Values: yes | no
    ejected-on-startup = no



    # Which image (or folder) is selected at startup?
    # last: Last-selected item at power-off (recorded in IMAGE_A.CFG)
    # static: Static path specified in INIT_A.CFG
    # init: First item in root folder
    # Values: last | static | init
    image-on-startup = last



    # Time in milliseconds to attempt to probe attached display.
    # You may set this to 0 if you have a 2-digit LED display attached.
    # Values: 0 <= N <= 65535
    display-probe-ms = 3000



    ##
    ## IMAGE NAVIGATION



    # Auto-select the current file after N seconds
    # N=0: disable auto-select
    # Values: 0 <= N <= 255
    autoselect-file-secs = 2



    # Auto-select the current folder after N seconds
    # N=0: disable auto-select
    # Values: 0 <= N <= 255
    autoselect-folder-secs = 2



    # Sorting of folder entries in native navigation mode.
    # always: Always sort folder entries. Large folders may be truncated.
    # never: Never sort folder entries, instead presenting them in FAT order.
    # small: Only sort folders which are small enough to sort in full.
    # Values: always | never | small
    folder-sort = always



    # Priority of files vs subfolders when sorting folder entries:
    # folders: Folders listed before files
    # files: Files listed before folders
    # none: Files and folders are not differentiated
    # Values: folders | files | none
    sort-priority = folders



    # Navigation mode for selecting images/slots
    # native: Navigate through all valid images/dirs
    # indexed: Navigate through DSKA0000, DSKA0001, ...
    # default: native unless overridden by HxC-compat-mode config
    nav-mode = default



    # When navigating slots or folder, loop at min/max?
    # Values: yes | no
    nav-loop = yes



    # Actions of first two buttons.
    # B1 | B2 | Both
    # zero: Prev | Next | Slot 0
    # eject: Prev | Next | Eject/Insert
    # rotary: Up-dir | Select/Eject/Insert | -
    # rotary-fast: Prev | Next | Up-dir [Prev/Next are accelerated]
    # reverse: Reverse sense of B1 and B2
    # Multiple values can be separated by commas, eg twobutton-action=eject,reverse
    twobutton-action = zero



    # Input sensor type at the rotary-encoder inputs (pins PC10 and PC11):
    # [full | half | quarter]:
    # Rotary encoder, identified by fraction of a Gray-code cycle performed
    # per detent/click. If default value ('full') requires multiple
    # clicks/detents to move position then change to 'half' (if 2 clicks
    # per move) or 'quarter' (if 4 clicks).
    # [trackball]:
    # Blackberry-style trackball (eg. using Hall-effect sensors).
    # [buttons]:
    # Push-to-ground Prev/Next buttons.
    # [reverse]:
    # If the input is working in reverse, use this option to swap directions.
    # Multiple values can be separated by commas, eg rotary=quarter,reverse
    # Values: none | quarter | half | full | trackball | buttons | reverse
    rotary = full



    # Prefix for image names in indexed navigation mode. String can be empty ("").
    indexed-prefix = "DSKA"



    ##
    ## DISPLAY



    # Display Type: <type>[-rotate][-narrow]
    # auto: Auto-detect (7-seg LED, LCD, OLED)
    # lcd-CCxRR: CCxRR backlit LCD with I2C backpack (16<=CC<=40, 02<=RR<=04)
    # oled-128xNN: 128xNN I2C OLED (NN = 32 | 64)
    # -rotate: OLED view is rotated 180 degrees
    # -narrow[er]: OLED view is restricted to Gotek display cutout
    # (-narrow: 18 chars; -narrower: 16 chars)
    # -ztech: ZHONGJY_TECH 2.23" 128x32 SSD1305 OLED display
    # Values: auto | lcd-CCxRR | oled-128xNN[-rotate][-narrow[er]][-ztech]
    display-type = auto



    # OLED Font. Narrow and wide options.
    # Narrower 6x13 font permits:
    # - More characters per row
    # - Use of Gotek display cutout (eg. "display-type=oled-128x32-narrow")
    # Values: 6x13 | 8x16
    oled-font = 6x13



    # OLED contrast/brightness.
    # Values: 0 <= N <= 255
    oled-contrast = 143



    # Text height and arrangement on LCD/OLED
    # 'default', or a comma-separated list (one entry per LCD/OLED row, top down).
    # Each list item is a digit plus optional height specifier: <content-row>[d]
    # content-row: '0-3' = specified content row, '7' = blank
    # 0: Current image name
    # 1: Status
    # 2: Image/Volume info
    # 3: Current subfolder name
    # height specifier: 'd' = double height (32px, OLED only; ignored for LCD)
    # 'default' depends on display, eg.: oled-128x32='0,1' ; oled-128x64='3,0d,1'
    # Values: [0-7][d] | default
    display-order = default



    # Turn an LCD or OLED display off after N seconds of inactivity
    # N=0: always off; N=255: always on
    # Values: 0 <= N <= 255
    display-off-secs = 60



    # Automatically switch LCD/OLED display on when there is drive activity?
    # Values: yes | no
    display-on-activity = yes



    # LCD/OLED long filename scroll rate in milliseconds per update
    # Values: 100 <= N <= 65535
    display-scroll-rate = 200



    # LCD/OLED pause time at start/end of scroll, in milliseconds
    # Zero means endless scroll
    # Values: 0 <= N <= 65535
    display-scroll-pause = 2000



    # LCD/OLED long filename scroll rate during navigation (ms per update)
    # Values: 0 <= N <= 65535
    nav-scroll-rate = 80



    # LCD/OLED long filename pause before scroll, during navigation (milliseconds)
    # Values: 0 <= N <= 65535
    nav-scroll-pause = 300



    ##
    ## MISCELLANEOUS



    # Speaker volume for head STEP
    # Values: 0 <= N <= 20
    step-volume = 10



    # Report the specified version number to host software
    # Values: <quoted-string> ("" means report real version)
    # eg. da-report-version = "v3.0.0.0"
    da-report-version = ""



    # Automatically extend certain types of truncated image file (SSD,DSD,TRD)?
    # Values: yes | no
    extend-image = yes

  • Habe ich gemacht
    Jumper auch gesetzt
    Kein Erfolg
    Ich denke der ist hinüber
    Ich warte aber trotzdem mal, vielleicht erbarmt sich jemand und läd die orig. Gotek Firmware.
    Dann würde ich es noch einmal versuchen.
    Wenn das dann auch nicht geht, ist der hin.
    Muss dann einen neuen ordern

  • Endlich läuft die Kacke!!!!
    Der Stick musste ich auf FAT formatieren (und nicht auf FAT32)
    Die Datei IMG.CFG darf nicht auf dem Stick.
    In der FF.CFG muss eingetragen sein:
    interface = ibmpc
    host = pc-dos


    An alle Beteiligten!!!!!


    Ein ganz herzliches Dankeschön für eure Anregungen und vor allem die die kostbare Zeit die Ihr investiert hattet.
    Ihr habt wesentlich zum Erfog beigetragen und wart mir eine unverzichtbare Hilfe.


    Mit Grüßen aus Offenburg


    Olaf

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!